User manual

F5100 / F5105 / F5110 / F5115 User Manual

down.

 Alarm Input: Select the connected alarm. Sensor input 1: The external sensor which

is connected to sensor input1 of the alarm input.

Note: You can set the alarm input function at alarm input screen. (Please go “Setting →

Advanced → Alarm Input → Setting”). For more details, you can check Chapter 9.7.

 Parameter: the parameter of CGI (defined in URL of HTTP → General) is

from your target device. For example, move=down.

 Message: message will show up in the form of Message = PTZ down. If your

target device didn’t support the parameter of message, you can’t see the

message. So you can just take the message as a note. For example: PTZ

down.

 Effective Period: Set the period when the periodical sending is effective.

Always: The periodical sending is always effective.

Schedule: You can specify the period when the periodical sending is effective in the

schedule setting in the other section.

Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced

→ Schedule → Setting”) For more details, you can check Chapter 9.6.

Setting-Advanced

HTTP Event