User manual

F5100 / F5105 / F5110 / F5115 User Manual
 Audio Detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”) For more details, you can check Chapter 9.10.
 Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.
 Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.
 Network link down: Click it on to send a message to the specified HTTP server
while network link down.
 Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.
 Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
67
Setting-Advanced
HTTP Event