User manual

F5100 / F5105 / F5110 / F5115 User Manual
9.3.2 Alarm sending
Set to transmit the snapshot or video clip file with connection to the alarm detection by the
external sensor input or by the built-in motion detection function. Select On to send the file
to network storage location linked with the alarm detection.
 Alarm sending: Select On to set to send mail with connection to the alarm detection.
 Image file name: Type the file name you want to assign to the file to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
 Suffix: Select a suffix to add to the file name
Date time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 Alarm:
 Motion Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion detection → Setting”) For more details, you can check Chapter 9.9.
 Audio detection: Click it on for using Audio detection function as a sensor. You can
Setting-Advanced
Network Storage
62