User manual

F5100 / F5105 / F5110 / F5115 User Manual

9.2 SMTP

Set the SMTP menu when you want to send an image or video clip via e-mail. By using

Mail (SMTP) function, you can send a mail with attached file which has been shot linked

with the external sensor input or with the built-in motion detection function. The file can

also be sent periodically. E-Mail (SMTP) setting menu is composed of three tabs, General,

Alarm sending and Periodical sending.

9.2.1 General

Select On when you use the SMTP function. The common setting options are displayed

below. Select Off, if you do not wish to use the e-Mail (SMTP) function.

Note : The Setting of general part will be the same as IP Notification. (Please check “Setting →

Basic → Network → IP Notification”)

 SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address

of the SMTP server.

 SMTP Server Port: You can set port number from 1~65535 according to your mail

server. The default value is 25.

Security setting: Tick SSL box if the mail server you use has security restriction.

Setting-Advanced

SMTP