User manual

F5100 / F5105 / F5110 / F5115 User Manual

 Suffix: Select a suffix to add to the file name

 Date & time: The date & time suffix is added to the Image file name. The date/time

suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),

hour (2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits),

thus 14-digit number is added to the file name.

 Sequence number: A consecutive number of 10 digits between 1 and 4294967295

and two fixed digits 00 is added to the Image file name.

 Sequence number clear: Click Clear and the suffix of the sequence number returns

to 1.

 Alarm

 Motion detection: Click it on for using Motion detection function as a sensor. You

can set motion detection function at the motion detection function screen.

Note: You can set motion detection at motion detection screen. (Please go “Setting →

Advanced →Motion detection → Setting”) For more details, you can check Chapter 9.9.

 Audio detection: Click it on for using Audio detection function as a sensor. You can

set audio detection function at the audio detection function screen.

Note: You can set audio detection at audio detection screen. (Please go “Setting →

Advanced →Audio detection → Setting”) For more details, you can check Chapter 9.10.

 Network link down: Click it on to receive a snapshot or a video clip while network

link down. If Attached file type (go “Setting → Advanced → FTP client → General”)

was clicked as video clip, you can using Alarm buffer function as a sensor. It’s for

recording audio file in the IP CAM before and after disconnected network.

Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →

Alarm buffer → Setting”) For more details, you can check Chapter 9.8.

 Alarm Input: Select the connected alarm. Sensor input1: The external sensor which

is connected to sensor input1 of the alarm input.

Note: You can set the alarm input function at alarm input screen. (Please go “Setting →

Advanced → Alarm input → Setting”). For more details, you can check Chapter 9.7.

 Effective Period: Set the period when the periodical sending is effective.

Always: The periodical sending is always effective.

Schedule: You can specify the period when the periodical sending is effective in the

Schedule setting in the other section.

Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced

→ Schedule → Setting”) For more details, you can check Chapter 9.6.

Setting-Advanced

FTP Client