User manual

F5100 / F5105 / F5110 / F5115 User Manual
8.3.6 IP Notification
When network notify type is set to “ON”, you can send an e-mail notification of the completion of
the network setting.
 Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE.
 SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address
of the SMTP server.
 SMTP Server Port: You can set port number from 1~65535 according to your mail
server. The default value is 25.
Security setting: Tick SSL box if the mail server you use has security restriction.
Note: If you use g-mail as your mail server, you should set 25 as your port number and
tick SSL box.
 Authentication: Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
 On: When authentication is necessary an e-mail is sent, there are SMPT, POP before
SMPT or both three options.
 SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
 POP before SMTP: Select if POP before SMTP authentication is necessary when an
e-mail is sent.
 POP server name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
44
Setting-Basic
Network