User manual

F5100 / F5105 / F5110 / F5115 User Manual

from IP Camera. And you can choose the bit rate from 4.75k to 12.2k. However, the

usage of this codec will cause frame-rate decreasing.

Off: Select Off, audio file won’t be transmitted by IP Camera.

 Audio Mode: You can select Full duplex or Half duplex.

Full duplex: Select it for simultaneous communication in both direction between the

connected administrator and IP CAM. It means both parties can speak and be heard at

the same time.

Half duplex: Select it for communication in both directions, but only one direction at

a time (not simultaneously). It means one party begins receiving a signal, it must wait

for the transmitter to stop transmitting, before replying. Therefore, once one party

speak, he can’t hear any voice from the other party, just like the communication by

radio set.

 Video Clip Format: Select RECORDING compression format H.264 or MPEG-4.

MPEG-4: MPEG-4 has the advantage of sending a lower volume of date per time

unit across the network (bit-rate) compared to Motion JPEG and therefore provides a

relatively high image quality at a lower bit-rate (bandwidth usage).

H.264: H.264 provides higher compression rate than MPEG-4. Thus, H.264 can

decrease the bandwidth usage and further apply on 3G. However, H.264 will occupy

more system resources than MPEG-4. As long as the operating system appears

operating difficulties under H.264 format, please change to select MPEG-4.

 IR Threshold (only for F5110/F5115): Select LED light On, Off, or Auto.

On: Select On will led always work.

Off: Select off will disable led.

Auto: Select Auto will appear two thresholds, which one is Bright and

the other is Dark, and you can adjust the threshold for led Auto-On and Auto-Off

respectively. The Bright value higher, the led auto-off more easily in the bright

environment will be. The Dark value higher, the led auto-on more easily in the dark

environment will be. Both values range from 0 to 100.

 Overlay:

Text Overlay: Some information can be showed on the display screen, such as Date /

Time and user-defined text. And the background color can be chosen.

Privacy Mask: A specific area of the video image can be covered.

Setting-Basic

Camera