User manual

F3105 User Manual
 Audio Detection: Click it on for using Audio Detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”) For more details, you can check Chapter 9.8.
 Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.
 Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.
 Network Link Down: Click it on to receive a snapshot or a video clip while network
link down. If Attached File Type (go “Setting → Advanced → FTP client → General”)
was clicked as video clip, you can using Alarm buffer function as a sensor. It’s for
recording audio file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm Buffer → Setting”) For more details, you can check Chapter 9.6.
68
Setting-Advanced
HTTP Event