User manual

F3105 User Manual

 Image File Name: Type the file name you want to assign to the files when sending to the

FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underline)

for naming.

 Suffix: Select a suffix to add to the file name

 Date & time: The date & time suffix is added to the Image file name. The date/time

suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),

hour (2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits),

thus 14-digit number is added to the file name.

 Sequence number: A consecutive number of 10 digits between 1 and 4294967295

and two fixed digits 00 is added to the Image file name.

 Sequence number clear: Click Clear and the suffix of the sequence number returns

to 1.

 Alarm

 Motion Detection: Click it on for using Motion Detection function as a sensor. You

can set motion detection function at the motion detection function screen.

Note: You can set motion detection at motion detection screen. (Please go “Setting →

Advanced →Motion Detection → Setting”) For more details, you can check Chapter 9.7.

 Audio Detection: Click it on for using Audio Detection function as a sensor. You can

set audio detection function at the audio detection function screen.

Note: You can set audio detection at audio detection screen. (Please go “Setting →

Advanced →Audio Detection → Setting”) For more details, you can check Chapter 9.8.

 Network Link Down: Click it on to receive a snapshot or a video clip while network

link down. If Attached File Type (go “Setting → Advanced → FTP Client →

General”

) was clicked as video clip, you can use Alarm Buffer function as a sensor.

It’s for recording audio file in the IP CAM before and after disconnected network.

Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →

Alarm Buffer → Setting”) For more details, you can check Chapter 9.6.

 Effective Period: Set the period when the periodical sending is effective.

Always: The periodical sending is always effective.

Schedule: You can specify the period when the periodical sending is effective in the

Schedule setting in the other section.

Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced

→ Schedule → Setting”) For more details, you can check Chapter 9.5.

Setting-Advanced

FTP Client