User manual

18
 Exposure time: Select a proper exposure time according to the light source of the surroundings. The
exposure times are selectable as the following durations: 1/120second, 1/60 second, 1/30 second, 1/12
second, 1/6 second, 1/3 second, and 1second. Shorter exposure time brings less light.
 Gain: According to the surroundings in the low light and make the range among 1-64. The higher value
makes brighter image, however brings more noise at the same time.
 Low light behavior: This is the operation aims at low light and night mode. According to the
surroundings you can manually set the preferable settings differ from the regular “Exposure Settings”.
Nevertheless, the low light behavior can be scheduled up by working day, weekend, and night mode
as user’s preference.
 Backlight Compensation: It makes the object clearer display when the image background is too bright
or the object is too dark.
Wide Dynamic Range
Enable Wide Dynamic Range auto in different level to improve the exposure when both bright and dark
areas simultaneously in the field of view of the camera. The level goes from 1-8, the larger number brings
stronger influence, and the default is off.
Noise Reduction
Select the period you wish the noise reduction being executed in the drop-down menu, there are working
day, weekend, and night mode.
PTZ Control
PTZ Setting
You may set the speed of digital pan/tilt/zoom, and also speed for preset/patrol. The range goes 1-100(slow to
fast).
View Area
Control Panel
This can be set up the selected view area in every profile. Besides the viewing window there is a PTZ
control panel to go to the direction you want.
Note: Before operating this function, you must set the resolution beneath 1920x1080, and move your view area to
your desired position.
Preset Position
Name your every position and click “add”, you can click “go” to make sure if the preset position has been
written in.
Guard Tour