User manual

D5110/D5111/D7110 User Manual
58
7.4.2 Alarm sending
Set to send the command with connection to the alarm detection by the external sensor input
or by the built-in motion detection function. Select “On“ to send the image and audio file to
HTTP server linked with the alarm detection.
Alarm sending: Select On to set to send command with connection to the alarm detection.
 Alarm
Motion Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion detection → Setting”)
 Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.
 Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.