User manual

D5110/D5111/D7110 User Manual
28
 White Balance: Choose the white balance among Auto, Florescent, Incandescent and
Black & White.
 Lighting: The default setting of lighting environment is Auto. However, you may also
choose 50 or 60 Hz upon the lighting environment of your country.
 Exposure mode: Choose Auto or Manual upon the capture environment.
 Auto: Choose Auto and you have 3 options to adjust the exposure condition.
 Back Light Compensate: Click it on and it helps avoid problems in
situations where the main subject ends up being too dark, such as when
shooting people or other subjects in front of a bright background.
 Slow Shutter: Click it on and the range of shutter speed will be from 1/5 to
1/120 sec. It will adjust the shutter speed automatically and helpful to
capture the clear image when shooting in a dark place.
 High Speed Mode: Click it on and the shutter speed will be close 1/120 sec. as far as
possible to help to capture the motion image of sports or high-speed phenomena.
 Manual : Choose Manual and you can select options, such as Shutter Speed, Gain,
and Bad Pixel Compensate.
 Shutter Speed: The default value is 1/30 sec. and you can select the value
among 1/4, 1/6, 1/12, 1/30, 1/60, and 1/120 sec.
 Gain: The default value is 2 and you can select the value among 0~9. The
value of the gain will influence the brightness of the image. The more the
value is , the brighter the image is. However, the higher gain value might
cause more noise.
 Iris: Choose Auto or Open upon the capture environment. (D5111,D7110 Only)
 Auto: Choose Auto to enable auto Iris. If you wish to use Auto IRIS function, please