User manual
Table Of Contents
- UChapter 1. Safety Instruction
- UChapter 2. Minimum System Requirement &
- UProduct Feature
- UChapter 3. Using IP Camera via Web Browser
- UChapter 4. Operating IP Camera via Mobile Phone
- UChapter 5. MSN Messenger
- UChapter 6. Configuration of Main Menu
- Snapshot
- Full screen
- UChapter 7. Setting-Basic
- UChapter 8. Setting-Advanced
- UChapter 9. appendix
- UEurope – EU Declaration of Conformity
- UFederal Communication Commission Interference Statement
D6111 User Manual
26
Quality:
Auto: The quality and bitrate will be adjusted automatically according to the frame
rate.
Fixed Quality: Select the value of quality among Medium, Good, Delicate and
Excellent.
Fixed Bitrate: Set the bitrate of H.264 image transmission for a line. Select one among
64Kbps, 128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps, 1.5 Mbps, 2
Mbps, 3 Mbps, 4 Mbps, 5 Mbps, and 6 Mbps.
Note: Concerning how to select the suitable image quality for Fixed Quality or Fixed
Bitrate, please refer to the CHAPTER 9. APPENDIX / A. Frame-rate & Bitrate Table.
IP interval: It’s the ratio of i-frame & p-frame. Select one among 1, 5, 10, 15, 30, 60, and
120. The ratio smaller, the streaming smoother.
Note: The IP interval value means a ratio of “ P-frame / I-frame “ in a certain section of
frame sequences. The ratio lower, the live view clear. However, live view will lag if the
bandwidth isn’t big enough. In this situation, you have to choose another bigger IP interval
value to solve the problem.
Note: If Video Clip Format of General Menu (go “Setting → Basic → Camera →
General” ), which is for recording compression, is chosen H.264, the IP interval option will
appear “Auto” automatically and can’t select. The limit is for avoiding damaging the
recording quality of 5 seconds temporary-saved video recorded on FTP server.
7.2.3 MPEG-4
Setting-Basic
Camera