User manual

P5110 / P5115 User Manual
 Alarm sending: Select On to set to send mail with connection to the alarm detection.
 Image file name: Type the file name you want to assign to the file to attach a mail. You
can use up to 10 alphanumeric, - (hyphen) and _ (underscore) for naming.
 Suffix: Select a suffix to add to the file name
Date & time: The date & time suffix is added to the Image file name. The date & time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2
digits), thus 14-digit number is added to the file name.
Sequence number: A consecutive number is added to the Image file name.
Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 Alarm
 Motion Detection: Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion detection → Setting”) For more details, you can check Chapter 9.12.
 Audio detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”) For more details, you can check Chapter 9.13.
 Network Link Down: Click it on to receive a video clip while network link down.
It’s for recording video file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm buffer → Setting”) For more details, you can check Chapter 9.11.
 Alarm Input: Select the connected alarm. Sensor input1: The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm input → Setting”). For more details, you can check Chapter 9.10.
 Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
Setting-Advanced
Network Storage
69