User manual

P5110 / P5115 User Manual
 Sequence number: A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
 Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
 Alarm
 Motion detection: Click it on for using Motion detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced →Motion detection → Setting”) For more details, you can check Chapter 9.12.
 Audio detection: Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”) For more details, you can check Chapter 9.13.
 Network link down: Click it on to receive a snapshot or a video clip while network
link down. If Attached file type (go “Setting → Advanced → FTP client → General”)
was clicked as video clip, you can use Alarm buffer function as a sensor. It’s for
recording audio file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm buffer → Setting”) For more details, you can check Chapter 9.11.
 Alarm Input: Select the connected alarm. Sensor input1: The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm input → Setting”). For more details, you can check Chapter 9.10.
 Effective period: Set the period when the periodical sending is effective.
Always: The periodical sending is always effective.
Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 9.9.
60
Setting-Advanced
FTP Client