User manual

P5110 / P5115 User Manual
9.3 Patrol
There are four patrol tours to set for composing different preset positions. Each one lists up to
8 positions which can be programmed, and the camera moves to the programmed positions
sequentially. The camera stops when it moves to the last preset position.
 Tour name: Rename the tour name.
 Tour position
 Order: There are 8 orders to select for camera directions.
 Select Pos.: There are up to 32 preset positions to choose for each order.
 Waiting time: When you click Recall, the camera moves to position of the selected preset
number.
 Clear: When setting specific preset number position to tour, click Clear to clear this
direction information.
 Clear All: Be careful! When you click Clear All, it will clear this tour all information out.
 Set: Use it to save the camera position to a preset number.
 Set as default tour: Click it on to set this tour as default.
 Tour Start: To click Tour Start, and the camera moves on patrol tour.
 Tour Stop: While the camera moves on patrol tour, click Tour Stop to stop the patrol
tour.
 Carry out the following steps:
1. Click Order to choose one of eight orders.
2. Click Select Pos. to set the preset position.
3. Click the SET. The tour position is saved.
4. Follow the steps to set the other orders.
5. Click the OK to save the tour.
57
Setting-Advanced
Patrol