User manual

P5110 / P5115 User Manual
Chapter 4. Setting up Wireless Configuration
(Only for P5115 )
The wireless network has to be set up by using cable network connection. After setting the
camera correctly, the wireless function can work without cable network connection. Please
follow the setting process below step by step:
1. Connect IP Camera with Ethernet connection.
2.Go to “Setting → Basic → Network → Wireless,” choose option “On”. You will see
the wireless Setting screen.
3. Then click “Refresh”. All access points (AP) around you will show up.
4. Select the AP you wish to connect.
5. Enter password at active transmit key if you need. If you don't know the setting of the
wireless AP, please ask your network administrator.
Setting up Wireless
Configuration
8