Installation guide

b2. Browser viewing
For 2.5G mobile phone browser viewing, type “http:// <IP>/mobile.htm ” into your 2.5G web browser.
Wireless Setting (P5115 Model)
Power the IP Camera and connect an Ethernet network cable to the IP Camera’s LAN port. Using Intelligent IP
eless”, set the wireless option to “On”
ection.
ddress field.
Installer and entering the camera’s setting page.
Please go to “Setting → Basic → System → Network → Wir
1. Click Refresh and choose the Access Point you wish to connect.
2. Enter the password within the Active transmit key field if required.
3. Choose DHCP to connect through a dynamic IP or assign a static IP for the wireless conn
4. Click “OK” to apply settings. The Wireless IP address appears in the IP a
Note: The wireless private IP address can be found in Intelligent IP Installer.
Wireless IP address
Windows Live Messenger Setting
Live video of the IP Camera can be displayed using Microsoft Live Messenger, while providing its public IP a
to users for access via t
ddress
he web browser. This feature is useful especially when the IP address of the camera is
→ System →
dynamically assigned.
If you wish to set up MSN Messenger, enter the camera’s setting page. Go to “Setting → Basic
Network → Messenger”, set the Messenger option “On.” Then, follow the below steps:
8
2. Enter the new MSN Messen
g
er Lo
g
in Account an
d
Password within the desi
g
nated boxes.
1. Create a new MSN Messenger account (e.g.: [e-mail]) for the IP Camera.
8