Installation guide

Physical overview
 Focus Adjustment Ring - Adjust focus manually to achieve the best image quality
 Infrared LEDs - Infrared LEDs for night use up to 15 working distance
 Wireless Antenna (for P5115) - For connection of IEEE 802.11 b / g wireless network.
 Built-In Microphone - Built-In Microphone for Two-way Audio
 Network LED indicator - Network LED will light up after connecting with network.
 Power LED indicator - Power LED will light up after completing the boot process.
 Power Connector - For connection of 12V DC input.
 Reset - When the device is empowered, press the Reset Button to reboot the device, or hold the Reset Button for 10
seconds to set the device settings back to factory default
 Audio In -To support audio in with Microphone for two way audio
 Audio Out - To support audio out with earphones or speakers for two way audio
 Network Connector - For connection to the Ethernet via RJ-45 standard with PoE
 I / O Terminal Connector - 1Input / 1Output to support External Alarm and Sensor used for motion detection, event
triggering and alarm notification…etc.
 DI / DO Terminal connector diagram - Please refer the following illustration below for connection method:
2