M511E User Manual 0
M511E User Manual M510E Pan/Tilt IP Camera Hardware User Manual -ContentsCHAPTER 1. SAFETY INSTRUCTION ........................................................................................2 CHAPTER 2. INTRODUCTION .....................................................................................................4 CHAPTER 3. PACKAGE CONTENTS ..........................................................................................5 CHAPTER 4. PHYSICAL DESCRIPTION........................................
M511E User Manual Hardware User Manual Chapter 1. Safety Instruction Before you use this product This product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to heed the following. Legal Caution Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.
M511E User Manual In case of a breakdown In case of system breakdown, discontinue use and contact your authorized dealer. In case of abnormal operation If the unit emits smoke or an unusual smell, If water or other foreign objects enter the cabinet, or If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2 Contact your authorized dealer or the store where you purchased the product.
M511E User Manual Chapter 2. Introduction The M510E Pan/Tilt IP Camera provides full overview to be the perfect solution for indoor applications, but still be cost-effective.
M511E User Manual Chapter 3.
M511E User Manual Chapter 4. Physical Description Overview Focus Adjustment Ring - Adjust focus manually to achieve the best image quality Built-In Microphone - Built-In Microphone for Two-way Audio Power LED indicator - Power LED will light up after completing the boot process Network LED indicator - Network LED will light up after connecting with network. Power Connector - For connection of 12V DC input.
M511E User Manual DI / DO Terminal connector diagram Please refer the following illustration below for connection method. D+ D- COM NO Ground Switch 12V Alarm out device Ground 12V Max.
M511E User Manual Chapter 5. Basic Connection M511E offers Power over Ethernet (PoE) connection. However, you still can use M511E with PoE or without PoE connection. You can follow the procedure below to connect the IP Camera for both applications. 5.1 Without PoE Connection 1. Connect IP Camera’ Ethernet port to your Hub / Switch / Rout supporting PoE 5.2 With PoE Connection 1. Connect the power adaptor to IP Camera. 2.
M511E User Manual Chapter 6.
