User manual

F7110 / F7115 User Manual
Authentication: Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, select one of the
authentication methods from the followings.
SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP: Select when POP before SMTP authentication is necessary
when an e-mail is sent.
Note：When you set to On, be sure to select either or both SMTP or / and POP before SMTP.
 POP server name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
 User name, Password: Type the user name and Password of the user who has the
mail account. This setting is necessary when the SMTP server which sends e-mails
performs authentication.
 Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You
can specify up to three recipient E-mail addresses.
 Administrator e-mail address: Type the Administrator e-Mail address up to 64
characters. This address is used for reply mail and sending system messages from the
SMTP server.
 Test: Click to test your SMTP setting works or not.
 Overwrite: Select on to disable capacity warning and overwrite your memory card when
space free is not enough.
 File Manager: click to manage your memory card.
 Refresh: Click to refresh this page.
 Back: Click to back folder.
 File Name: Click the following file name to forward folder.
 Select All: Select all to delete or save to network storage.
 Delete: Delete selected folder or files.
 Save to network storage: Save selected folder or files to configured network storage.
Setting-Advanced
73
Network Storage