User manual

 Authentication: Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
 On: When authentication is necessary an e-mail is sent, select one of the
authentication methods from the followings.
 SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
 POP before SMTP: Select if POP before SMTP authentication is necessary when an
e-mail is sent.
Note：When you set to On, be sure to select either or both SMTP or / and POP before SMTP.
 POP server name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
 User name, Password: Type the user name and Password of the user who has the
mail account. This setting is necessary when the SMTP server which sends e-mails
performs authentication.
 Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
 Administrator e-mail address: Type the Administrator e-Mail address up to 64
characters. This address is used for reply mail and sending system messages from the
SMTP server.
 Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail
60