User manual

7.1.2 Alarm sending
Set to forward the image and video file to the specified FTP server linked with the alarm
detection by the built-in motion detection function. Select On to send the image file to FTP
server linked with the alarm detection.
 Remote Path: Type the path to the destination in FTP server up to 64 characters.
 Image File Name: Type the file name you want to assign to the images when sending to
the FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _
(underscore) for naming.
 Suffix: Select a suffix to add to the file name
 Date & time: The date & time suffix is added to the Image file name. The date/time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits),
thus 14-digit number is added to the file name.
 Sequence number: A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
 Sequence number clear: Click Clear and the suffix of the sequence number returns
to 1.
53