Installation guide

Install the hardware and connect all cables

a. Wall mounting and Ceiling mounting

1. Use the 3 supplied screws to fix the base plate to a flat surface.

2. Loosen the lock ring to adjust the desired angle of the camera.

3. Tighten the lock ring.

b. Connect all cables

1. Use a standard RJ-45 network cable to connect the IP Camera to the Network connection

2. Connect power adaptor to the IP Camera.

Microsoft OS: Using the software CD to install Intelligent IP Installer

Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow those steps to

install the firmware.

Access the IP Camera using Intelligent IP Installer

1. Before using Intelligent IP Installer, please check two setting.

a. Browser’s Internet Properties → Security

→ Default Level

b. Browser’s Internet Properties → Privacy

→ Uncheck Pop-up Blocker

Select “Intelligent IP Installer” and follow the installation process to complete the installation.