Installation guide

4
LED Indicator Definition
LED Color Indication
Network Blue Flash blue while Network activity.
Power
Red Steady red for booting up process; Steady red 30 Seconds when WPS configure failed.
Blue Steady blue for booting up completion
Purple
Flash purple during firmware upgrading; when reset button pressed for at least 5 sec.
to factory default
Unlit When you press reset button; or Power off
Power Mode
PoE Mode
Power
Requirement
PoE (IEEE802.3af)
with Class 3
Power
Consumption
D3100: 2.5W
D3200: 5W
Install the hardware and connect all cables
a. Hardware Installing
1) Before connecting the Ethernet cable, please use one hand to hold top cover and another hand to press
the bottom of camera.
2) Then shift top cover to left (counter-clockwise) to open the dome cover.
(for F3105)