Manual

Page 6

PAP M92 & M85 Pistol Manual

Bolt Cocking Handle: Located on right hand side of the firearm protrudes from bolt used for

pulling bolt rearward. (See Illustration #4.)

External Control Parts - Bolt Block Safety: Located on the receiver above the trigger, pivot

slide style. When moved to the full up position it blocks bolt movement, covers bolt and blocks

trigger movement. When in the lower position, the bolt is fully exposed and free to move and the

firearm will fire if trigger is pulled! Do not disengage the safety unless you are ready to fire the

firearm. (Safety engaged- the bolt is covered, blocked and the trigger is blocked from full travel;

Safety disengaged- the bolt is fully exposed and the trigger has full travel. MAKE SURE YOU

UNDERSTAND HOW THE SAFETY WORKS BEFORE YOU LOAD OR USE THE FIREARM).

(See Illustrations #2 - #3.)

Illustration #2

Illustration #3 Illustration #4

“SAFE” position.

“FIRE” position.

Bolt cocking handle.

Illustration #1

Diagram showing major operational parts of the

PAP M92 PV & PAP M85 PV Semi-Auto Pistols

Study of this picture will aid you in understanding the instructions in this booklet.

1. Recoil spring cam

2. Safety lever

3. Receiver

4. Rear sight

5. Bolt cocking handle

6. Gas tube securing pin

7. Upper handguard

8. Gas tube

9. Front sight

10. Muzzle cap

11. Barrel

12. Lower handguard

13. Magazine

14. Magazine release lever

15. Trigger

16. Pistol Grip