Manual

DESCRIPTION, HANDLING AND MAINTENANCE
During the assembly, observe the following:
- When inserting the recoil mechanism, the con-
necting plate of the barrel should be normal in rela-
tion to the barrel.
- The groove on the guide should properly lean on
the barrel lug.
- The guide must come into the appropriate hole
on the guide bushing (Fig. 14)
- Cylindrical part of the coupling should, at the
same time, come through the holes on the frame and
on the connecting plate. (Fig. 15)
To check whether the pistol is properly assembled,
pull the slide rearwards, block the pistol and trigger
it.
Fig. 14> Position of the guide Fig. 15> Position of parts before inserting coupling