Manual
DESCRIPTION, HANDLING AND MAINTENANCE
slide is released and it moves forward, bringing a
cartridge into the barrel. The pistol is again ready
to re.
If there is no need to replace the magazine after
the last cartridge is red, the coupling is pressed
downwards. This releases the spring, which returns
the slide to the front position.
There are two ways to block the pistol with the
hammer:
• Whenthehammeriscocked
(
Fig. 4)
hold the hammer and then pull
the trigger until the hammer is
released. Release the trigger
and slowly lower the hammer
until the sear catches the rst
cam on the hammer. In that
way, the hammer and the slide
are blocked. This action should
be done very carefully and with
the pistol pointed upwards.
• Whenthehammerislowered(
Fig. 4)
pull the hammer backwards (short pace), until the
trigger catches the rst cam on the hammer. If you
want to shoot, only pull the hammer fully back-
wards.
• Thepistolalsohasanautomaticsafety.
It prevents triggering (of the pistol that is not
blocked) when the magazine is out and there is a
cartridge in the barrel. In that case, the automatic
safety blocks the trigger. It is now impossible to
pull it.
Fig. 3> Blocking the trigger with
the hammer cocked
Fig. 4> Blocking the trigger with the hammer
lowered