Specification

Graco

Spray Speciﬁcations

ZAR

Interior Oil Modiﬁed Urethane Poly OMU

Air-Assisted Airless Spray - Graco

FinishPro 395

Fluid pressure should register 600 to 650 psi on the digital pressure gauge on the airless pump and 15

lbs. of pressure on the attached air compressor.

For a 4" wide fan pattern, use a Graco

FFT210 RAC X Fine Finish Tip. For a 6" wide fan pattern, use a

Graco

FFT310 RAC X Fine Finish Tip.

Thinning is not necessary when spraying at this pressure. Hold the spray gun 8" - 10" from the surface

and apply.

Clean the sprayer with soapy water and dispose of the liquid according to local regulations.