User manual

Z020 EVDO Modem (User Manual)
Zapp – The Next Generation Network 9/36
3) BUSY (Traffic) :
- Blue : Data call connected
- Green : General call connected.,
- Blink : Incoming call initiated and not answered yet.
- Off : Not in connected state
4) SMS :
- Yellow : Exists message in inbox
- Blink : New message arrived in inbox
- Off : Empty inbox
5) LEDs colors during activation process:
- The POWER LED is blinking BLUE : The activation process is in progress. Please wait.
- The POWER LED is RED : Activation process has failed. Please turn the modem off and then
turn it back on after 10 minutes and wait for the activation process to restart.
- The POWER LED is BLUE : Activation process has succeeded. The modem will restart.
Now the modem is active and it can be used.
- The IDLE/BUSY/SMS LEDs are off during activation process.
2.1.2 Other Components
1) Internal Antenna
Two antenna for diversity reception are already installed in the case
2) +5V DC Power Jack
+5V main power supply to USB modem and is used for charging
3) Mini USB Port
Connected to desktop or notebook computer
4) Ear Jack (Not Supported)
5) Battery Contact Switch
6) External Antenna Port
Used to improve signal reception and transmission
7) UIM Card Socket (not available in Zapp network)
8) Battery Contact Pins