User manual

Z020 EVDO Modem (User Manual)
Zapp – The Next Generation Network 6/36
2. Getting Started
In order to use Z020 USB MODEM following must be satisfied:
1) Zapp Internet Express Software and Z020 USB MODEM Driver has been installed
on the computer.
2) The Z020 EVDO modem is active (the activation process has been successfully completed – this is
indicated by POWER LED in green colour, and then by the restart of the modem).
<CAUTION> PLEASE CONNECT THE BATTERY AND EXTERNAL POWER SUPPLY TO INSURE MAXIMUM
PERFORMANCE OF THE MODEM. IF USING THE MODEM WHILE ON-THE-ROAD, PLEASE KEEP
BATTERY INTACTED WITH THE MODEM. AND MAKE SURE THE BATTEY IS FULLY CHARGED
BEFORE THE USAGE. WHEN THE BATTEY CAPACITY IS LOW, MAKE SURE TO CHARGE IT
BEFORE CONTINUING TO USE.
1. If using at home, recommends connecting to the external power supply.
2. If using at remote areas with Notebook, strongly recommends using the battery.
2.1 USB Modem Components
IDLE LED
BUSY LED
SMS LED POWER LED
INTERNAL
ANTENNA
POWER KEY