User manual

Z020 EVDO Modem (User Manual)
Zapp – The Next Generation Network 21/36
4) Select “Device Manager” from Hardware Tab.
5) As shown in below with red boxed that shows “AnyDATA CDMA USB Modem” and
“AnyDATA CDMA USB Serial Device,” the Driver has been successfully installed.
Note:
Please pay attention and write down the COM
number in “AnyDATA CDMA USB Serial Device
(PID 6501) “(COM8)”. In this case it was COM8, but it
might be different for other installations.
This COM port number will be used in the “Zapp
Internet Express” program for selecting proper port.