User manual

Z020 EVDO Modem (User Manual)
Zapp – The Next Generation Network 13/36
8) Press “Install” button to advance to the next step to install the program.
9) When program has been successfully installed, following window will display.
10) Press
button for ending the program installation.
<Remark>
If modem is not connected to PC/Notebook and device driver is not installed, then the program will not launch
even after completion of installation program.
3.4 Connecting to Z020 USB MODEM and Driver Installation and Uninstallation.
3.4.1 Proper connection and Driver Installation
1) Connect the modem and PC’s USB port with supplied USB cable.
2) Installing “AnyDATA USB Modem Driver” window will appear.
Select “Install from a list or specific location (Advanced )”.