User manual

Z020 – EVDO Modem(User Manual)
Zapp – The Next Generation Network 41/48
[Basic] Tab
The basic configuration for connect to the network using EV-DO modem.
All values are set automatically, however if wants to change the value then check appropriate
box/boxes in the left and press button to take effect.
UserName, Password, ServiceNum
will be provided by the local carrier.
[Advance] Tab
This part is used to change the important parameter for EV-DO modem. If you want to change the value
then check appropriate
box/boxes in the left and press button to take effect.
Pref Mode: Place to select a mode from 1x
only, EVDO only and EVDO+1X.
<Note>
Basically the modem supports all modes if the
network supports them.