Service manual

27
27
- 35/40/45/50B-7 Brake Adjustment.
- It’s recommendable checking every 2000
working hours if the stroke of the brake piston
(pos 54 on page 26) hasn’t increased above
3.5mm.
-
If so, it will be necessary to replace the brake
disk pack.
-
Follow next procedure in order to estimate the
wear of the discs:
A. Disconnect the hand brake rod (cable).
B. Move the lever towards the brake piston
(until it touches the topside of the piston pos
54).
C. Pull the lever strongly and measure the
stroke at the end of the parking brake lever.
D. If the parking brake lever stroke is over
21mm the disc pack has to be replaced.