Owner manual

Strapping the Outputs of the Studio X Mono Amps

Master amp

Slave amp

2Ω Minimum Load

As Above

1. Connect the master amplier’s speaker output + terminal to the +

(posive) terminal of the woofer.

2. Connect the slave amplier’s speaker output + Terminal to the -

(negave) terminal of the woofer

3. Connect the Connect the two amplier’s speaker output - (negave)

terminals together

Note: You are creang a much more powerful amplier in this way and dou-

bling the output. Make sure your speaker wire can transfer the power. We

recommend a minimum of 12 gauge speaker lead, and for best performance

you should use 10 gauge or 8 gauge.