Owner's Manual

16
5-Ch. Amplifier - High Power 3-Ch. Mode
You can use the 5-Ch amp to create a stereo amp with 180 watts RMS/ch, plus a mono
amp for subwoofer. As with any bridged setup the speakers must be a minimum of 4Ω
impedance. If you are using the active crossovers you should be sure that they are set to
the same frequency.
CH1
CH2
CH4
CH3
CH5
CH5
2 OHM
MIN LOAD
BRIDGED 4 OHM MIN
BRIDGED 4 OHM MIN