Tus neeg siv phau ntawv

11
ADSP-Z8 IV-6AT Panels
10
DSP-Z8 IV AT Panels
1 2 3 4 5 6
11
7 8 9 10
12
13
1. Power-On LED
2. Auto-on switch for OEM integration
3. USB connector for PC control
4. Dash remote port
5. Protection LED
6. Microphone Input for Auto-Tuning
7. Comm Port for HD-BT module
8. Coaxial digital input
9. 8-Channel RCA inputs
10. 2-Channel RCA outputs
11. Speaker level input plug for OEM hookup
12. Variable gain controls with clip indicators
13. Optical digital input
14. Speaker output connectors for Ch 1~2
15. Speaker output connectors for Ch 3~4
16. Speaker output connectors for Ch 5~6
17. Power/Rem/Gnd terminals
14 15
16 17
DSP-Z8IV AT
CH1 CH3 CH5 CH7
CH2 CH4 CH6 CH8
4
1 2 3
5
6
1. Comm Port for HD-BT module
2. Coaxial digital input
3. 8-Channel RCA inputs
4. Speaker level input plug for OEM hookup
5. Variable gain controls with clip indicators
6. Optical digital input
7. 8-Channel RCA outputs
8. Microphone Input for Auto-Tuning
9. Dash remote port
10. USB LED
11. USB connector for PC control
12. Power-On LED
13. Power/Rem/Gnd connector
14. Auto-on switch for OEM integration
+12V
GND
REM
OUT
REM
IN
PC USB
AUTO
ON OFF
POWERUSB
REMOTE
AUTO
TUNE
MIC
CH1 CH3 CH5 CH7
CH2 CH4 CH6 CH8
7 8
9 1311 141210
Note: The left channel positive terminal and the right channel negative terminal are used for
bridging the speaker outputs. The amp is stable at 2 ohms stereo or 4 ohms mono. The amp
should not be run at 2 ohms mono