User Manual

7
6
6
STEP 1 Lay partflat on the groundadd system bolts and lower
the dividers onto panel 7 Using the bolts as guide, join the
pieces together and tioghten with excenters (see page 2)
8
6
6
7
STEP 2
Now insert bolts into the top bridge and lower it down
onto the dividerscarefully aliging bolts and holes and
tighten with excenters.
3
4
STEP 3 Lay the keyboard tray n° 3 on the groundand using bolts
and excenters fixatepart to the tray Carefully tighten the
excenters.
11
3
12
STEP 4 Lay left side partflat on the groundsoft surface! add
system bolts and add partas well as the assembly of part +
Tighten with excenters