User Manual

7
5
9
4
1
5
6
6
7
6
6
5
STEP 1 Lay part n° 5 flat on th ground, introduce system bolts and
attach parts n° 6. Tighten with extenders (see page 2). Be careful to
have the pre-mounted drawer rails on the inside of the dividers!
STEP 2
After introducing bolts, lower down top part n° 7 onto dividers
n°6, and tighten with excenters to assemble first module.
9
7
5
STEP 3 Put the left side part n° 9 flat on the ground (we
recommend soft surface like carpet), put bolts and lower down
assembly of parts n° 5,6,7. TIghten using excenters.
STEP 4 add the rest of the bolts and proceed to attach
parts n° 4 and 1 in a similar manner. Tighten with
excenters.