Operation Manual

MWC291E t English
22
If you often cook or reheat the same types of dishes, you can store the cooking times and functions in the
oven’s memory, so that you do not have to reset them each time. You can store one cooking.
Example : To set memory
1. Set your cooking programme as usual. ( except for auto defrost, cakes, crusty and auto cook function )
2. Touch memory button.
The oven will beep and " : 0" or clock appears in the display. Your settings are now stored in the oven’s
memory.
To store different settings simply repeat setting procedure.
Example : To use memory
1. Touch memory button. Storing settings in the oven’s memory appears in the display.
2. Touch start/speedy cook button.
The oven light comes on and the turntable starts rotating. Cooking starts and the time in the display will
count down.
Note : When there’s no memory key setting, "DATA EMPTY SELECT FUNCTION" will show in the Display
will be displayed.
“TEMPERATURE IS HIGH” message will be
shown when the inside temperature of the oven is high
before selecting defrost or 40°C convection mode.
To get better cooking result, the oven needs “cooling”.
If the inside temperature of the oven is higher than
expected or the temperature sensor doesn't work
properly, "ERROR 2" message will be shown in the
display. Unplug the power and allow the oven to cool
before using.
When the temperature sensor is disconnected,
"ERROR 3" message will be shown in the display.
Unplug the power and call our technical service.
5&.1&3"563&*4)*()
&3303
&3303
Memory
Error Messages