User manual

2. Press to change the setting. Each pressing of the button increases the level number. After
reaching level 10, the count starts again from level 1.
3. Press the on/off button to confirm the setting.
The water hardness table
German degrees
(°dH)
French degrees
(°fH)
mmol/l Clarke degrees Water softener lev-
el
47 -50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1) Factory setting
2) Do not use salt at this level.
Activating the acoustic signal for the end of programme
While the appliance is in user mode:
1. Press .
• The indicators and are off.
• The indicator still flashes.
• The indicator is off = the acoustic signal is deactivated.
2. Press to change the setting.
• The indicator
is on = the acoustic signal is activated.
3. Press on/off button to confirm the setting.
7