User manual

RESET function

Press and hold simultaneously and until the appliance is in programme selection mode.

With this function you can cancel the running programme or the delay start.

User mode

While the appliance is in programme selection mode:

1. Press and hold

and .

• The indicators , and flash.

Settings available in the user mode:

• The level of the water softener according to the water hardness.

• The activation or the deactivation of the acoustic signal indicating the end of programme.

As the appliance stores the saved settings, there is no need to configure it before every cycle.

Adjusting the water softener

While the appliance is in user mode:

1. Press .

• The indicators and are off.

• The indicator

still flashes.

• The indicator starts to flash. The number of flashes indicates the current setting (e.g. 5 flashes + pause

+ 5 flashes... = level 5).