User manual

Adding multi-tablets
2
1
2
0
3
0
• Do not fill the salt container and the rinse aid dispenser.
• Set the rinse aid dispenser to the lowest position.
Setting and starting a programme
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.
3. Press the programme button until the indicator of the chosen programme is flashing.
4. Close the appliance door to start the programme.
Opening the door while the appliance operates
Opening the door while a programme is running stops
the appliance. It may affect the energy consumption and
the programme duration. After closing the door, the
appliance continues from the point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it, as this may cause
damage to the appliance.
If, afterwards, the door is closed for
another 3 minutes, the running
programme ends.
End of the programme
When the programme is completed the indicator is on.
1. Press the on/off button or open the door to deactivate the appliance.
2. Close the water tap.
After 5 minutes of non-use, the appliance enters standby mode and all the indicators are off. It
decreases the energy consumption.
Hints and tips
General
The following hints will ensure optimal cleaning and
drying results in daily use and also help to protect the
environment.
• Remove larger residues of food from the dishes into
the waste bin.
• Do not pre-rinse dishes by hand. When needed, use
the prewash programme (if available) or select a
programme with a prewash phase.
• Always use the whole space of the baskets.
• When loading the appliance, make sure that the
dishes can be completely reached and washed by
the water released from the spray arm nozzles.
Make sure that items do not touch or cover each
other.
9