User manual

While the appliance is in user mode, within about 5 seconds:

1. Press the programme button.

• The indicators and are on.

• The indicator flashes.

2. Wait until the indicators

and are off.

• The indicator is off = the acoustic signal is deactivated.

3. Press the programme button to change the setting.

• The indicator is on = the acoustic signal is activated.

4. Press the on/off button to confirm the setting.

Activating AirDry

AirDry improves the drying results with less energy consumption.

By default, AirDry is activated with all programmes excluding (if applicable) but it is possible to deactivate it.

While the drying phase operates, the device opens the appliance door. The door is then kept ajar.

While the appliance is in user mode, within about 5 seconds:

1. Press the programme button twice.

• The indicators and are on.

• The indicator flashes.

2. Wait until the indicators and are off.

• The indicator

is on = AirDry is activated.

3. Press the programme button to change the setting.

• The indicator is off = AirDry is deactivated.

4. Press the on/off button to confirm the setting.

Caution! If children have access to the appliance, it is advised to deactivate AirDry as opening the

door may pose a danger.

Before first use

1. Make sure that the current level of the water

softener agrees with the hardness of the water

supply. If not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance. Do

not use detergent and do not load the baskets.

After starting a programme, it may take up to 5 minutes

for the appliance to recharge the resin in the water

softener. It seems that the appliance is not working. The

washing phase starts only after this procedure is

completed. The procedure is repeated periodically.