User`s manual
Click on the ‘Main Setting’ tab.
Output Device: Select ‘6 Channel’( )
DSP Mode: Clicking on the Digital Volume button( ) will allow volume control per channel.
Clicking on the ‘Speaker Test’ button ( ) on the bottom will run the channel test.
* The ZM-RS6F USB is a five channel unit that does not have a built-in sub woofer. Therefore, the sub
woofer channel will not be heard during the channel test. This is not a defect of the product.
* ‘S/PDIF Output’ and ‘Audio Jack’ settings are not applicable to ZM-RS6F USB.
- 8 -