CPU Cooler FS-C77 User’s Manual www.fatal1ty.
FATAL1TY STORY Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually played competitive billiards in professional tournaments and won four or five games off guys who played at the highest level. I actually thought of making a career of it, but at that young age situations change rapidly. Because I’ve been blessed with great hand-eye coordination and a grasp of mathematics (an important element in video gaming) I gravitated to that activity.
LIVIN’ LARGE Since my first big tournament wins, I have been a “Professional Cyberathlete”, traveling the world and livin’ large with lots of international media coverage on outlets such as MTV, ESPN and G4TV to name only a few. It's unreal - it's crazy. I’m living a dream by playing video games for a living. I’ve always been athletic and took sports like hockey and football very seriously, working out and training hard.
User’s Manual (English Version) Please read this manual thoroughly before installation. 1. Important Notices 1.1) Please refer to Section 7 on “Compatible CPUs” to confirm that your CPU is compatible before using the CPU cooler. 1.2) Check the components list and condition of the product before installing. If there are any problems, contact the shop where you purchased it and get a replacement or refund. 1.3) Zalman Tech Co., Ltd., Fatal1ty, Inc.
4. Exploded View 1) Fan 2) Grip S-Type 6) Clip 3) Grip L-Type 4) Fan Support 7) Fan Fixing Screw 8) FHS 5) Fan Support Fixing Screw 5. Patents Korean Patent Application No. 00-54635 Korean Design Applications Nos. 04-16030 etc. Patent Applications pending in over 20 nations around the world, including the USA, EU, and Japan. 6. Components 6.
7. Compatible CPUs 7.1) Intel Pentium 4 - Socket 775/478 All Pentium 4 CPUs conforming to Socket 775/478 platform Caution) (1.73in) 7.1.1) No motherboard components higher than 39mm(1.54inch), nor the PSU, graphics card, RAM etc. should be present within a 68mm(2.68inch) radius from the center of the CPU. 7.1.2) For Socket 478, as shown in Figure 2, a motherboard that is not compliant with Intel’s "10.
8.1) Intel Pentium 4 - Socket 775 8.1.1) Install the Clip Support for Socket 775 Align the Clip Support for Socket 775 and the Backplate for Socket 775 with the Mounting Holes on the motherboard and fasten them together using the Clip Support Fixing Bolts. The Lever Slot on the Clip Support should be properly oriented on the hinged side of the socket lever when installing. * The Backplate Support is used for the convenience of installation. You can remove it if it is not necessary.
.2) Intel Pentium 4 - Socket 478 8.2.1) Apply Thermal Grease Clean off particles and residue from the top of the CPU then spread a thin layer of the included Thermal Grease thoroughly on top of the CPU. 8.2.2) Install Clip Supports for Socket 478 CPU (IHS) 1) Retention Guide 2) Clip Supports for Socket 478 Install the Clip Supports for Socket 478 on both sides of the Retention Guide as shown in the diagram. 8.2.
8.3) AMD Sempron/AMD64 - Socket 754/939/940 1) Nipple 8.3.1) Fasten Nipples 2) Small Washer Place Small Washers on the motherboard. Then put Nipples over them and fasten the Nipples until the Backplate for AMD64 is firmly attached to the motherboard on the opposite side of the CPU. 3) Motherboard * A Retention Guide is not necessary for installing the FS-C77 on Socket 754/939/940. 4) Backplate for AMD64 8.3.
www.fatal1ty.com www.zalman.co.kr www.zalmanusa.com Fatal1ty and the Fatal1ty logo are trademarks of Fatal1ty, Inc. under the master license of Auravision, Inc. Zalman and the Zalman logo are trademarks of Zalman Tech Co., Ltd. ©2005 Zalman Tech Co., Ltd. All rights reserved.
