(English version) CNPS9700 LED Intel Socket 775 CPU Core 2 Duo Dual Core Pentium Pentium D Pentium 4 Celeron D AMD Socket AM2/754/939/940 CPU Athlon 64 FX Athlon 64 X2 Dual Core Athlon 64 Opteron Sempron * Please read this manual thoroughly before installation. http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Compatible with all single and dual core CPUs for Intel’s Socket 775 and AMD’s Socket AM2/754/939/940. 2) 100% copper heatsink with aerodynamically optimized “tunnel” design for maximum cooling efficiency. 3) Innovative and patented, curved heatpipe design for a heat transfer capacity of up to six heatpipes with the use of just three. 4) 0.2mm ultra-slim fins for minimized weight and reduced airflow resistance. 5) Ultra quiet CNPS 110mm LED fan.
4. Patents Korean Patent Reg. No. 10-0600448 Korean Design Reg. No. 30-0403411, 0403412 Patent applications pending in over 20 nations around the world including USA, EU, and Japan. 5. Precautions 1) Excessive force exerted on the fan may damage the fan, resulting in damage to the system. 2) Avoid inserting any objects into the fan while it is in operation. 3) Use and keep the product away from the reach of children and pets. 4) Check the components list and condition of the product before installation.
8. Installation Requirements If the case is equipped with an Air Guide, then the Air Guide Duct must be removed before installation. Refer to the following diagrams, and install only on systems that meet the following installation requirements : ① No interfering components (PSU, graphic card etc.) within 62mm from the center of the CPU. No interfering components (ODD etc.) within 48mm from the center of the CPU. Case cover must be at least 150mm apart from the motherboard.
1) Intel Socket 775 ① Clip Installation Refer to “The Clip Installation Method” on page 3 to correctly install the Clip (S-Type, ⑨) according to the orientation of the Retention Guide. ② Clip Support Installation Align the Clip Support for Socket 775 (⑫) and the Backplate for Socket 775 (⑬) with the mounting holes on the motherboard, and fasten them together by using the Clip Support Fixing Bolts (⑪).
2) AMD Socket AM2/754/939/940 ① Thermal Grease Application Clear off particles or any residue from the contact surface of the CPU and heatsink. Shake the Thermal Grease (ZM-STG1, ②) well then apply on the contact surface of the CPU and heatsink base. ② Clip Installation Refer to “The Clip Installation Method” on page 3 to correctly install the Clip for AMD Sockets (⑦) and Clip Lever (⑧) on the CNPS9700 according to the orientation of the Retention Frame.
10. FAN MATE 2 Installation and Usage 1) FAN MATE 2 Installation Inside a System 2) FAN MATE 2 Installation on the Outside of a System Double - sided Tape Fan Connector (CNPS9700) FAN MATE 2 6-Pin Connector Motherboard Connect the two 3-pin connectors of the cable to the motherboard and to the CNPS9700’s Fan Connector as shown in the diagram.
12. Zalman Computer Noise Prevention System Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless Case Fans, VGA Coolers, and Fan Controllers facilitate stable performance and a noiseless computing environment. Noiseless Power Supply Noiseless Case Fan Fanless Northbridge Cooler Heatpipe HDD Cooler Ultra Quiet VGA Cooler Fan Controller 13.
