(English version) CNPS7500 CNPS8700LED NT Intel Socket 775 CPU Core 2 Quad Core 2 Extreme Core 2 Duo Pentium D Pentium 4 Celeron D AMD Socket AM2/754/939/940 CPU Athlon 64 FX Athlon 64 X2 Dual-Core Athlon 64 Opteron Dual-Core Opteron Sempron * Please read this manual thoroughly before installation. http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Compatible with all single, dual, and quad core CPUs for Intel socket 775 and AMD socket AM2/754/939/940. 2) Compatible with Slim Tower / Low Profile Home Theatre PC Enclosures. 3) 100% pure copper heatsink with aerodynamically optimized “tunnel” design for high performance cooling. 4) Patented curved heatpipe design for heat transfer performance of up to 4 heatpipes using just 2. 5) Ultra-thin 0.2mm fins for minimized weight and significantly reduced airflow resistance.
4. Precautions 1) Use and keep the product away from the reach of children. 2) Check the components list and condition of the product before installation. If any problem is found, contact your place of purchase to obtain a replacement. 3) Excessive force exerted on the fan may damage the fan, resulting in damage to the system. 4) Avoid inserting any objects into the fan while it is in operation. 5) Do not ingest or put the thermal grease into the mouth. If ingested, get medical attention.
7. Installation (Intel Socket 775) 1) Clip Support Installation Align the Clip Support for Socket 775(⑦) and the Backplate for Socket 775(⑧) with the mounting holes on the motherboard and fasten them together with the Clip Support Fixing Bolts(⑥). The Lever Slot on the Clip Support for Socket 775 should be properly oriented on the hinged side of the Socket Lever when installing.
4) Cooler Installation Slide the Clip Lever(④) onto the Clip’s(③) Groove for Intel. Align and connect the Clip’s Lug Slot with the Arrow Marked Lug on the Clip Support for Socket 775. Press onto the Clip Lever when aligning the Clip Lever’s Lug Slot with the Lug. Make sure that the cooler is installed on the center of the CPU. Groove for Intel Groove for AMD Clip’s Lug Slot Clip,③ Clip Lever,④ Lug Clip Lever,④ Arrow Marked Lug 5) Power Connection ◆ Please refer to “9. Power Connection” on page 5. 8.
3) Cooler Installation Slide the Clip Lever(④) onto the Clip’s(③)Groove for AMD. Align and connect the Clip’s Lug Slot with the Lug on the motherboard’s Retention Frame. Press onto the Clip Lever when aligning the Clip Lever’s Lug Slot with the Lug. Groove for Intel Groove for AMD Clip’s Lug Slot Clip,③ Clip Lever,④ Lug Lug Clip Lever,④ 4) Power Connection ◆ Please refer to “9. Power Connection” on page 5. 9.
11. Zalman Computer Noise Prevention Systems Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless Case Fans, VGA Coolers, and Fan Controllers facilitate stable performance and a noiseless computing environment. Noiseless Power Supply Noiseless Case Fan Fanless Northbridge Cooler Heatpipe HDD Cooler Ultra Quiet VGA Cooler Fan Controller 12.
