Specifications

※

The specifications of any product may change without prior notice to improve performance.

4) Power Connection (Fan Mate 2 Connections)

◆

Please refer to Fan Mate 2 Installation and Usage on page 6.

1) Clip Support Installation

Align the Clip Support for Socket 775 and the Backplate for Socket 775 with the mounting holes on the motherboard

and fasten them together using the Clip Support Fixing Bolts. The Lever Slot on the Clip Support for Socket 775 should

be properly oriented on the hinged side of the Socket Lever when installing.

※

If a Lug of Clip Support for Socket 775 interferes with any motherboard components, install the Clip Support

for Socket 775 with the Lug facing a different direction to avoid interference.

2) Thermal Grease Application

Clear off particles or any residue from the top of the CPU then

spread a generous amount of the included Thermal Grease

thoroughly on top of the CPU.

3) Cooler Installation

Insert the Clip Lever into the Clip. Connect the Clip's Lug Slot with the Arrow marked Lug of the Clip

Support for Socket 775. Press onto the Clip Lever when aligning the Lever's Lug Slot and the other Lug.

Make sure the cooler installed on the center of the CPU.

※

Using a flat-head screwdriver is recommended for easier installation and uninstallation.

7. Installation (Intel Socket 775)

Thermal Grease

CPU (IHS)

Clip

Clip Lever

Clip’s Lug Slot

Arrow marked Lug

Driver

Clip Lever

Lever’s Lug Slot

Lug

Clip Support Fixing Bolt

Clip Support for Socket 775

Motherboard

Backplate for Socket 775

Socket Lever Hinge

Socket Lever

Lever Slot

Lug